For best results with Absolute Ozone generators we recommend using AirSep Oxygen concentrators. AirSep offers completely self-contained oxygen generators. Equipped with air compressors, these generators require no special installation. Simply connect the oxygen outlet to your oxygen distribution system and the power cord to a grounded electrical outlet. Turn the unit on and set your oxygen delivery pressure.
*An unprotected or inadequately ventilated environment or improper control power may cause damage to the oxygen concentrator and is not covered under warranty.
Product Flow: 30 - 55 SCFH (Factory set to your specific requirements)
Standard Product Pressure: 1–65 psig
Product Purity: 93% Nominal
Product Dew Point: -100°F (-73°C)
Ambient Operating Conditions
Locate the oxygen generator in a well-ventilated area that is protected from weather elements and remains between 40°F (4°C) and 112°F (44°C)
Feed Air Requirements
Flow Rate: 11 - 15 SCFM
Clean and Dry "Plant Air" per ISO Specification 5.7.5
Pressure: 90 psig (620 kPa) minimum Temperature: 122°F (50°C) maximum
Control Power Requirements
120 V ~ ±10%, 50/60 Hz, Single Phase, 1.5 A 220 V ~ ±10%, 50/60 Hz, Single Phase, 0.75 A Typical Power Consumption (at 93% purity): 180 W
Compressed Air Inlet: ¼" NPT x ¼" NPSM Product Gas Outlet: ¼" NPT/B size oxygen adapter
Certifications and Approvals
NRTL certified compliance to UL3101.1, CSA, CE
Warranty: 1 Year Parts and Factory Labor*
Should you have any questions or concerns, please, do not hesitate to contact us either by filling out this form or calling us directly 1-877-486-3761
KEEP IN TOUCH
You need support? Visit our Ozone User support forum on LinkedIn and open tickets for you questions.