AirSep AS-K

For best results with Absolute Ozone generators we recommend using AirSep Oxygen concentrators.   AirSep offers completely self-contained oxygen generators. Equipped with air compressors, these generators require no special installation. Simply connect the oxygen outlet to your oxygen distribution system and the power cord to a grounded electrical outlet. Turn the unit on and set your oxygen delivery pressure.

for best results with absolute ozone generators we recommend airsep oxygen concentrators
  • Produces Oxygen from compressed air
  • Microprocessor controlled
  • Low operating cost
  • Easy to install and maintain
  • AirSep AS-K Cut Sheet

*An unprotected or inadequately ventilated environment or improper control power may cause damage to the oxygen concentrator and is not covered under warranty.



Product Characteristics

Product Flow: 750 - 900 SCFH (19.72 - 23.66 Nm3/hr)1

1Factory set to your specific requirements.

Standard Product Pressure: 45 psig (3.10 barg)2

2Pressures up to 65 psig (4.48 barg) available. Refer to chart for air requirement.

Product Purity: 93% Nominal

Product Dew Point: -100°F (-73°C)


Ambient Operating Conditions

Locate the oxygen generator in a well-ventilated area that is protected from weather elements and remains between 40°F (4°C) and 112°F (44°C)

Feed Air Requirements

Flow Rate: 140 - 155 SCFM

Clean and Dry "Plant Air" per ISO Specification 5.7.5

Pressure: 90 psig (620 kPa) minimum Temperature: 122°F (50°C) maximum


Control Power Requirements

120 V ~ ±10%, 50/60 Hz, Single Phase, 3 A

220 V ~ ±10%, 50/60 Hz, Single Phase, 1 A

Physical Connections

Compressed Air Inlet: 1” NPT

Product Gas Outlet: 3/4” NPT


Certifications and Approvals

NRTL certified compliance to UL3101.1, CSA, CE


Warranty: 1 Year Parts and Factory Labor*

Request Information

Should you have any questions or concerns, please, do not hesitate to contact us either by filling out this form or calling us directly 1-877-486-3761

Submitting Form...

The server encountered an error.

Form received.




10712 181 Street

Edmonton, AB, Canada

T5S 1K8



You need support? Visit our Ozone User support forum on LinkedIn and open tickets for you questions.


Contact us today to find out how Absolute Ozone® can assist you with your ozone application!